吴中齿轮输送泵

Features:

Asserted benchmark displacement（ml / r）:

4 / 6 / 8 / 10 / 12 / 16 / 20 / 25 / 32 / 40 / 50 / 63 / 80 / 100 / 112 / 150 / 180 / 200

Adjusted numerical value of overflow valve:

16bar ( according to the need to adopt higher pressures) Seal material: fluorine rubber

Applied viscosity  ( cSt ) ：12 ~ 20000

Applied scope:

Reduction box, wind power, lubrication system, filtration system, gas stations, vacuum machinery, engine...

Attention:

● Fluid has basic lubricating and compatible chemical characteristic, and it exclude solid impurity substance.

● Avoid idling

● The pump can only be operated in appointed direction, or else seal of the shaft will be wrecked.

● To avoid excessive pressure, the sysrem or pump should be equipped with a relief valve.

● Relief valve equipped with the pump functions as an atmospheric valve in a short time, other than a overflow valve.

● An additional overflow valve should be installed if overflowing exists in a long time.

产品性能

● 标称排量（ml/r）:4 / 6 / 8 / 10 / 12 / 16 / 20 / 25 / 32 / 40 / 50 / 63 / 80 /100 / 112 / 150 / 180 / 200

● 安全阀整定值：16bar （可根据需要采用更高压力）

● 密封材料：氟橡胶

● 应用粘度（cSt）：12~20000

应用范围

● 减速机 ● 风力发电 ● 润滑系统 ● 过滤系统

● 加油站 ● 真空机械 ● 发动机

注意事项

● 流体应具有基本的润滑性，不能含固体杂质，且化学特性相容。

● 避免空转。

● 泵只能以标定旋转方向运转，否则会破坏轴的密封性。

● 为避免过度压力，系统或泵应安装安全阀。

● 装在泵上的安全阀起到短期泄压作用，不可做溢流阀用。

● 长时间溢流需独立安装溢流阀。